Raw materials for coatings and dry building mixes

A paint that does not turn yellow with time. A non-cracking putty. A facade that repels water like a lotus leaf. All this is possible if the basis is the right raw materials for paintwork and raw materials for CCC. Because 70-80% of the properties of the finished system are precisely the components from which it is made.

Today, the trend is obvious: water technology, reduced VOC, durability. This means that it’s not just pigments and binders that are important, but biocides, coalescents, thixotropic agents, and stable paint additives. All this is in our catalog, and we supply it directly from the manufacturers, with clear logistics and technical support.

Water—based paint coatings – an eco-friendly solution

If you create modern interior paints, facade enamels or primers, water—based acrylic dispersions and functional additives become the basis of the formulation. We have everything to make the composition “work”: from biosecurity to film formation at +5 °C.

• CMIT/MIT, BIT biocides — protect “paint in a jar” from fungi and bacteria. Do you want a biocide for water paints? We will adjust it to the permissible concentration.
• Acrylic and styrene-acrylic dispersions is a binder with low VOC, excellent adhesion and flexibility. For example, 50% acrylic dispersion is the base of dozens of formulations.
• Thickeners — provide thixotropy, anti-melting of pigments, comfortable roller operation.
• Defoamers (for example, silicone SAG-10) — remove bubbles, regulate the air in the paint layer, especially important for facade paints and roll application.

Organ-soluble systems — proven durability

Despite the trend towards water-based paints, alkyd and epoxy materials remain indispensable where abrasion resistance, gloss, chemical and atmospheric resistance are important. And here, too, everything depends on the raw material — it must be reliable, stable and “clean” in terms of characteristics.

• Siccatives — from cobalt (10%) to lead-free systems based on Ca/Zn. Accelerate drying without discoloration, compatible with most alkyd binders.

All components undergo entrance control, are supplied with quality certificates and recommended dosages. If necessary, we will select an analog in rheology, drying time, or gloss level.

Dry building mixes — reliable formulation

Plaster that lies flat. An adhesive that “holds” tiles without precipitation. Self-levelling self-leveling floor, which does not shrink. All this is the result of properly selected components. We supply raw materials for dry building mixes, focusing on stability and convenience in dosage.

• Water repellent (silane-siloxane, paraffin powders) — protection of facades and cement plasters from moisture and efflorescence.
• Redispersible EVA Powders (RDP) — elasticity, adhesion to the substrate, resistance to cracking. Ideal for tile adhesives and thin-layer putties.
• Cellulose Esters (HPMC, HEMC) — retain water, increase thixotropy, regulate the open time and workability of the mixture.
• Superplasticizer — improves the mobility of cement mortar, retains water retention without loss of strength.
• Defoamers for cement systems — reduce air entrainment in self-leveling floors and self-leveling compounds.

We supply components that work in lime plasters, putties, finishing coatings and self—leveling floors. If you want to choose the raw materials for your formula, we will help you compare the parameters and send you a sample.

Why choose Revada Industrial

• 20+ years of successful work;
• Warehouses in Moscow, St. Petersburg, Rostov-on-Don, and Minsk are closer to your production;
• The laboratory helps optimize rheology, thixotropy, density, and durability of coatings;